Printing a PDF as a booklet, a handout or several pages per sheet
How do I print a PDF as a booklet or with several pages on each sheet?
Save your favourite tools
Create a free iBuildPDF account to keep your favourite tools and find them quickly anytime.
Free account. The PDF tools themselves never need one.
Short answer
Lay the pages out on sheets first, then print the result as ordinary pages. For a handout, choose how many pages go on each sheet. For a folded booklet, put the pages in booklet order, print on both sides flipping on the short edge, and fold the pile in half. Print one test sheet before the whole run.
Several pages on one sheet
Printing one slide or one page per sheet uses a lot of paper. With Pages per sheet you choose 2, 4, 6 or 9 pages for each sheet. Every page is shrunk to fit its place and drawn there in reading order, left to right and top to bottom, so the text in the result can still be selected.
- Two to a sheet keeps text comfortable to read and halves the paper.
- Four to a sheet suits slides; six leaves room on the sheet for notes by hand.
- Nine to a sheet is only readable when the original print is large.
Everything is shrunk by the same share, so small print gets smaller. If a line is hard to read on screen at the size it will print, it will be hard to read on paper.
A folded booklet
A booklet is a pile of sheets folded in half, so the pages that share a sheet are not neighbours in the document: the last page sits beside the first, the second beside the second to last. Booklet works that order out for you. One sheet holds four pages, two on each side, so blank pages are added at the end to reach a multiple of four, and each side is laid out on a landscape sheet with the right two pages next to each other.
- Make the booklet and download the new PDF.
- Print it on both sides of the paper, flipping on the short edge.
- Keep the sheets in the order they come out and fold the whole pile in half.
A4 paper folds to A5, and Letter to half a Letter sheet. For Arabic, Hebrew and other languages read from the right, put the fold on the right so the booklet opens from the other side. A thick pile bulges at the fold, so for a long document make several shorter booklets.
A book scanned two pages at a time
A flatbed scanner takes a wide sheet, so an open book becomes one wide page that holds two book pages. Halve pages cuts every page at its middle, left and right or top and bottom, and gives back a PDF with twice as many pages. The reading order says which half comes first: left first suits most languages, and right first suits Arabic and Hebrew.
It cuts at exactly half. If the fold of the scan is off centre, or the page is crooked, part of one page lands on the other, so crop the pages first. The half that is not shown is still stored in the file, so do not use this to hide something before sharing.
Before you print the whole run
- Print one test sheet first. Printers word the two-sided setting differently. If the back of the sheet comes out upside down when you hold it like a page, switch between flipping on the short edge and on the long edge.
- Print at actual size, 100%. The pages are already scaled. “Fit to page” shrinks them a second time and adds margins.
- Leave a margin. Most printers cannot print to the very edge, so keep some space around the pages when you make the layout.
- Number the pages first. Add page numbers before you make the booklet or the sheets, so every page carries its own number wherever it ends up.
All three tools run in your browser, so the PDF is not uploaded anywhere while you work.
Tools this article covers
Sources
Primary documentation for the claims above.




