How to remove blank pages from a scanned PDF

How do I remove the blank pages from a scanned PDF?

Short answer

Open the file in Remove blank pages. It measures every page, marks the empty ones and shows all the pages before anything is deleted. Pick the sensitivity that suits your scan, untick any marked page you want to keep, then remove the rest. A page with a page number, a signature or a faint note is not blank to its owner, so look at those before you save.

Where blank pages come from

Almost every blank page in a scanned PDF has one of a few causes, and knowing which one you have tells you whether it is safe to delete them all.

  • Two-sided scanning of one-sided paper. The scanner photographs the back of every sheet, and the backs are empty. This is the most common cause, and the blank pages sit in a regular pattern: every second page.
  • Separator sheets. A sheet put between documents so a scanner or a person can tell where one ends. It is meant to be thrown away.
  • A feeder that took two sheets at once. The scan has a gap where the second sheet should have been.
  • A page the original document left empty. A Word file whose last section break pushed an empty page to the end, or a chapter that was set to begin on a right-hand page. Some of those are deliberate.

How the tool decides a page is empty

Each page is drawn at about 360 pixels wide and measured in your browser; nothing is sent anywhere. The edges are ignored, because scanner shadows and punch-hole marks are the commonest “content” on an empty page. The colour of the paper is measured too, so grey recycled paper and a yellowed scan are judged against themselves rather than against pure white. A pixel counts as ink only when it is clearly darker than the paper and touches other ink, which is why a single speck of dust does not count.

The share of ink is then compared with the setting you chose under What counts as blank: Strict marks only pages with nothing on them, Standard also marks scanner dust and show-through from the other side, and Generous also marks a page that holds only a page number or one short line. A page whose paper is dark, such as a coloured divider or a black cover, is never marked automatically: whether a solid colour is “blank” is a decision about your document, not a measurement.

Pages that look blank and should stay

  • “This page intentionally left blank.” Legal, standards and technical documents print that sentence so a reader knows nothing is missing. Removing the page makes the numbering look wrong.
  • A page with only a number, a stamp or a signature. Generous counts it as blank; a contract or a form may need it.
  • A faint pencil note or a pale highlight. It is light enough that a machine can miss it. The page grid is there so you can see it.
  • A page you need for printing. A booklet is printed in sheets of four pages, so a document that is a page or two short can need its blank pages back before it is printed that way.
  • The back of a page that has writing on it. If it was scanned two-sided and the back is empty, it is usually safe to remove; if the back was meant to be a separate sheet, check before you do.

The rule that works: use Strict or Standard first, look at every page the tool marked, and only move to Generous when you can see on the grid that the extra pages really hold nothing you need.

After you remove them

The pages you keep are copied into a new document, so the removed ones are not left hidden inside the file, and your original is not changed: the result downloads as a separate file ending in -no-blank-pages. Do three quick checks before you send it.

  • Count. PDF page count tells you how many pages are left. If you removed every second page of a 40-page scan, 20 is what you expect.
  • Scroll the result once. A missing page shows as a jump in the content, such as a table that stops half way.
  • Check the size. Removing empty pages saves little, because they were small already. A scan that is still too large for an email or a form needs Compress PDF, and a page that was removed by mistake can be taken out of the original again with Delete pages.

If the scan itself is poor, with skewed or dark pages, it is quicker to scan again with Scan to PDF than to repair it page by page.

Tools this article covers

Last reviewed: November 22, 2026

Published by iBuildPDF.

More from the knowledge base