Adding a photo of your handwritten signature to a PDF

How do I put a photo of my real signature on a PDF?

Short answer

Sign a white sheet with a dark pen, photograph it flat in daylight, upload the photo in a signing tool and place the result on the signature line. The tool turns the paper transparent and trims the picture to the ink, so the signature sits on the page and not in a white box. It is an image of your signature, not a certified digital signature.

Make the photo easy to clean

The tool decides what is paper and what is ink from brightness alone, so the photo only has to make that difference obvious.

  • Use plain white paper and a dark pen. Black or dark-blue ink gives the strongest contrast; pencil and pale pens fade away. Lined or squared paper leaves its lines behind.
  • Shoot in daylight, from straight above. A shadow across the sheet is darker than paper and can be mistaken for ink. Stand so you cast no shadow and keep the phone parallel to the sheet.
  • Fill the frame. A signature that takes a third of the photo has far fewer pixels than one that fills it. Sign large, then move closer or crop.
  • Sign several times on the same sheet and keep the best one.

On an iPhone or Android phone, the Upload tab of Sign PDF offers your photo library and the camera, so you can take the picture without leaving the page.

What the tool does with the photo

Three things happen, all in your browser. The photo is not sent to a server.

  1. Paper becomes transparent. Each pixel’s brightness is measured with the standard weighting of red, green and blue. Light pixels disappear, dark pixels stay solid, and the ones in between are partly see-through, which keeps the soft edge of a pen stroke. The result carries an alpha channel, as a PNG does, so the page shows through.
  2. The picture is trimmed to the ink. The box you drag on the page is the size of the signature, not of the photo.
  3. The ink can be recoloured. Until you choose a colour it keeps its own; choosing one paints every ink pixel in that colour, which removes the grey-green cast a phone camera gives dark ink.

Large photos are scaled down first, to at most 1,600 pixels on the long side. That is plenty for a signature and keeps the PDF small.

Placing it so it looks signed

  1. Go to the right page first. The signature appears on the page in view.
  2. Drag it onto the line and resize it from its corner or with the Size slider. A signature about a quarter to a third of the page width looks natural; much larger looks pasted on.
  3. Let the writing rest on the line, not float above it, and keep it clear of the printed name beneath.
  4. Copy it to other pages if the document needs a signature or initials on each one.

What a photographed signature is, and is not

It is a picture of your handwriting placed on the page. For everyday paperwork such as forms, letters, approvals and rental agreements a picture is usually accepted, and in many places an electronic signature has legal effect: both the EU’s eIDAS Regulation and the US ESIGN Act say a signature cannot be denied effect only because it is electronic. But a picture proves nothing about who placed it or whether the document changed afterwards. Where a qualified or certificate-based signature is required, as for some public filings, you need an e-signature service that issues one.

Two practical points. Anyone who receives the file can copy the picture, so do not use it on a document you would not want a stranger to reuse. And flatten the PDF or send a copy, so the signature can no longer be moved. Open the saved file once and zoom in on the edges before you send it.

Tools this article covers

Sources

Primary documentation for the claims above.

Last reviewed: November 13, 2026

Published by iBuildPDF.

More from the knowledge base